Pengembangan Kompetensi Mahasiswa Teknik Mesin Universitas Lampung dalam Era Industri 4.0: Pembekalan Inovasi, Kewirausahaan, dan Kolaborasi dengan Industri
Keywords:
Industri 4.0, Inovasi, Kewirausahaan, Profesionalisme, Kolaborasi Kampus dan Industri.Abstract
Program ini dilaksanakan di Universitas Lampung dengan tujuan untuk meningkatkan kompetensi mahasiswa Teknik Mesin dalam menghadapi tantangan yang ditimbulkan oleh Revolusi Industri 4.0. Mengingat pentingnya kesiapan lulusan dalam mengadaptasi teknologi baru dan memenuhi tuntutan dunia kerja, fokus utama program ini adalah pada tiga aspek: Inovasi dan Kewirausahaan, Profesionalisme dan Budaya K3, serta Sinergi antara Kampus dan Industri. Program ini bertujuan untuk membekali mahasiswa dengan keterampilan teknis dan non-teknis yang relevan dengan kebutuhan industri digital. Metode yang digunakan dalam program ini meliputi pre-test dan post-test, diskusi kelompok, serta simulasi berbasis industri. Evaluasi yang dilakukan menunjukkan adanya peningkatan pemahaman yang signifikan dari mahasiswa dalam setiap topik. Mahasiswa berhasil mengidentifikasi peluang inovatif di sektor teknologi serta memahami pentingnya kolaborasi antara dunia akademik dan industri. Selain itu, kolaborasi ini juga membantu mahasiswa untuk memahami dan menerapkan budaya K3 dalam konteks Industri 4.0. Hasil dari program ini menunjukkan bahwa mahasiswa telah berhasil dipersiapkan untuk berinovasi, berkolaborasi dengan industri, serta mengintegrasikan prinsip keselamatan dan profesionalisme dalam pekerjaan mereka. Program ini diharapkan dapat berkontribusi dalam menghasilkan lulusan yang siap menghadapi tantangan dunia industri yang terus berkembang.
Downloads
References
Bermejo, M., Eynian, M., Malmsköld, L., & Scotti, A. (2021). University–industry collaboration in curriculum design and delivery: a model and its application in manufacturing engineering courses. Industry and Higher Education, 36(5), 615-622. https://doi.org/10.1177/09504222211064204
Chowdhury, R. (2025). A study on the education supply chain for graduate employability in bangladesh's higher education system. International Journal of Supply Chain Management, 14(5). https://doi.org/10.59160/ijscm.v14i5.6356
Ismuni, M., Usman, M., & Choiriyah, S. (2024). Digital trends and 21st century competencies in educational transformation. Kontigensi Jurnal Ilmiah Manajemen, 12(2), 930-939. https://doi.org/10.56457/jimk.v12i2.649
Jewpanya, S., et al. (2023). Green technologies in manufacturing: Environmental and economic perspectives. Sustainability. https://doi.org/10.3390/su15010001
Jewpanya, P., Nuangpirom, P., Pitjamit, S., Jaichomphu, P., Chaithanul, K., & Sriyab, S. (2023). Transforming industrial engineering education: introducing the cwile model for work-integrated learning in the digital age. Journal of Technical Education and Training, 15(4). https://doi.org/10.30880/jtet.2023.15.04.012
Khan, Z. and Patel, A. (2025). Leveraging industry-academic partnerships for skill development in the digital economy. Int. J. W. Mul. St., 2(1), 9-14. https://doi.org/10.71366/ijwos234123
Liu, L. (2024). Research on the construction path of new engineering + curriculum ideology and politics. Journal of Contemporary Educational Research, 8(11), 233-239. https://doi.org/10.26689/jcer.v8i11.8853
Ma, X., Zhang, W., Wu, T., Wang, S., & Li, F. (2025). Strategies for reforming graduate engineering education: a new model in the "made in china 2025" era. Asian Journal of Education and Social Studies, 51(6), 812-819. https://doi.org/10.9734/ajess/2025/v51i62037
Medvedeva, E., & Rubtsova, M. (2021). Integrating Industry 4.0 into higher education: Curriculum development and implementation strategies. Engineering Education Journal. https://doi.org/10.1016/j.enged.2021.03.004
Montero, D., Olajiga, O., Adeleke, A., Ani, E., & Olu-lawal, K. (2024). Evaluating the impact of precision engineering education on industry standards and practices. International Journal of Science and Research Archive, 11(1), 2336-2345. https://doi.org/10.30574/ijsra.2024.11.1.0336
Nkolika, C. (2024). Bridging the gap between curriculum, innovative pedagogy, and evolving industry demands for future-ready graduates. JIM, 2(2), 146-167. https://doi.org/10.22373/jim.v2i2.722
Olanrewaju, S.K. (2025). Economics curriculum as catalyst for graduate employability. International Journal of Social Science Humanity & Management Research, 04(10). https://doi.org/10.58806/ijsshmr.2025.v4i10n16
Ramírez-Cedillo, E., Armendariz-Rodriguez, M., García-Ávila, J., Quintero-Sanchez, D., Ortiz, A., & Vargas‐Martínez, A. (2025). Student 5.0: immersive learning in next-gen automation of manufacturing systems courses for the industry 5.0 era. Frontiers in Education, 10. https://doi.org/10.3389/feduc.2025.1416761
Rickli, J. and Huang, Y. (2021). Editorial: special issue on education and curriculum for smart and sustainable manufacturing. Smart and Sustainable Manufacturing Systems, 5(2), 1-3. https://doi.org/10.1520/ssms20210999
Sachlan, M. and Sudrajat, I. (2025). Tahapan penyusunan kurikulum pelatihan vokasi kejuruan teknik listrik bbpvp serang di era revolusi industri 4.0. Alsys, 5(4), 905-920. https://doi.org/10.58578/alsys.v5i4.6057
Suranta, N., Simanjuntak, M., & Sijabat, P. (2025). Transforming marine engineering education through industry 4.0 integration and sustainability-driven curriculum design. Research and Development in Education (Raden), 5(1), 519-527. https://doi.org/10.22219/raden.v5i1.39402
Wang, X., et al. (2025). Construction and practice of automation professional courses. GBP Proc. Ser. https://doi.org/10.70088/5bnmwc47
Widyakusuma, A. and Hakim, R. (2024). Crafting engineers for tomorrow: aligning education with industry to achieve sustainable development. Interdiciplinary Journal and Hummanity (Injurity), 3(11), 741-754. https://doi.org/10.58631/injurity.v3i11.1308
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Hadi Prayitno, Iskandar, Arif, Nisa
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
